Your shopping cart is empty!
Solar heating pump SolarSET 10kW
Solar heating pump SolarSET 10kW
1. solar collector field 16 m2 (using solar and air energy)
2. heat pump 10 kW
3. circular pump for solar field
The system includes: Heat recovery circuit 4 x 4m2 total 16m² (ground installation)
10 kW Multi-function heat pump: solar heat pump / water-air heat pump
Water circulation pump for the solar field
The solar-air heat collector is the heating circuit of the heat pump
The solar heat pump works - up to 25C around the clock.
The system also works in the winter.
The system uses a solar-air collector as a heat pump heat recovery circuit.
At night and in the cold, heat is collected from the air until -25C.
The sun warms the collector and reduces energy use.
Solar collectors can be used to heat water in summer even without a heat pump - connection and accessories (not included)
* absorber AISI321
Installation directly on the ground, rack or roof.
Mounting on a rack improves performance.
Plumbing and other installation accessories optional Adapted by Renovation Projects
for new house
Ideal for underfloor heating
For hot water heating
A real alternative to geothermal energy - winter loss is overcome in the spring-summer-autumn season.
New
5,199.00€
Ex Tax: 4,192.74€
Ex Tax: 4,192.74€
Solar heating pump SolarSET 10 kW incl.:
The system includes:
Note! the system always works - whether it's the sun or not.
Solar air collector - 5 pcs x 500 x 2000 mm total 5 m2Installation directly on the ground, rack or roof.
Mounting on a rack improves performance.
Plumbing and other installation accessories optional Adapted by
A real alternative to geothermal energy - winter loss is overcome in the spring-summer-autumn season.
SET10 EVI Heat pump
Rated cooling capacity 10 kw
Scroll EVI compressor
-
Max outlet water temperature 54℃
COP 4,65 according European Standard :EN14511-2 - Source (ethanol) temperature can be set up -25C
- EVI system,
- Water source heat exchanger type - stainless steel plate heat exchanger
Hot water side heat exchanger stainless steel plate heat exchanger
Ground Water flow 1,91 m3/h
Ground Water pressure down 34Kpa
- Nominal Voltage 240V 50Hz
- Cooling Capacity 10 kW
- Power Consuption 2.15 kW
- Soft start
- Scroll EVI type compressor
- Coefficient of Performance 4.65 (EN 14511/EN255) EN 14511
- Performance Data at B0/W35
- Max. Operating Current 13.4 A
- Operating Range Evaporator 0.15~0.8 Mpa
- Max. Operating Pressure heat suorce 0.8 Mpa
- Operating Range Condenser 1.0~3.6 Mpa
- Max. Operating Pressure heating 3.6 Mpa
- Operating Ambient Temp. - 25 / +40 ℃
- Noise 35 Db(a)
- Refrigerant R407A 2 kg
- Stainless steel body
- Full insulation inside
Power selection SET 10 we recommend for cases 6 to 10 kW. Note.! If 10 kW heat pump used in 6 - 9 kW case - consumption is the same but the service life is longer - heat pump create heat for heating system faster and start time is less.
Warranty:
- 2 years
- 24h spare parts service
- Optional 25 years service 24h